Contact Advantech Search Shopping list
  1. 1-800-425-5071
    1-800-425-5070
  2. Login
Home Boards & Cards Motion Control

Motion Control

Advantech offers both centralized and distributed motion control solutions. DSP-based SoftMotion control cards offer a centralized approach utilizing simplified function calls executed by the DSP to accomplish complex motion algorithms. Advantech also offers distributed motion control through its proprietary motion control network, AMONet, (Advantech Motion Network) and through EtherCAT solutions. These include a variety of distributed I/O and smart motion control modules.
Results per page 91872 | Sort by Price Highest / Lowest
Page 1 of 2
PCI-1220U-AE
CIRCUIT BOARD, 2-axis Stepping/Pules-type Servo Motor Card
  1. Independent 2-axis motion control
  2. Hand wheel and jog function
  3. 2-axis linear interpolation function
  4. 2-axis circular interpolation function
  5. Continuous interpolation function
  6. Programmable T/S-curve acceleration/deceleration rate
  7. Up to 4 Mpps output for each axis
  8. Two pulse output types: CW/CCW or pulse/direction
  9. Up to 1 MHz encoder input for each axis
  10. Two encoder pulse input types: A/B phase or up/down
  11. Constant speed control
  12. Position management and software limit switch function
  13. BoardID™ switch

Rs.33,864

Compare More
PCI-1245-AE
Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Hardware emergency input
  7. Watchdog timer
  8. Position latch via ORG & index signal
  9. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

Rs.61,550

Compare More
PCI-1265-AE
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

Rs.76,938

Compare More
PCI-1784U-AE
4-axis Quadrature Encoder and 4-ch Counter Universal PCI Card with 8-ch Isolated Digital I/O
  1. Four 32-bit up/down counters
  2. Single ended or differential inputs
  3. Pulse/direction and up/down counter
  4. x1, x2, x4 counts for each encoder cycle
  5. Optically isolated up to 2,500 VDC
  6. 4-stage digital filter with selectable sampling rate
  7. On-board 8-bit timer with wide range time-base selector
  8. Multiple interrupt sources for precision application
  9. 4 isolated digital input
  10. 4 isolated digital output
  11. BoardID™ switch

Rs.25,706

Compare More
APAX-5080-AE
CIRCUIT MODULE, 4/8-ch High Speed Counter Module
  1. Supports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode
  2. 4 or 8 counter channels depends on operating modes
  3. 32-bit counter range with 1 bit overflow/underflow
  4. 1 MHz counter frequency
  5. 4 digital input channels with counter gate functionality
  6. 4 digital output channels with counter alarm output functionality
  7. Over voltage, short circuit and thermal protection design
  8. 2500 VDC isolation protection (between channels and backplane)

Rs.22,054

Compare More
AMAX-1752-AE
CIRCUIT BOARD, Open Frame 32-ch Isolated DI Module
  1. Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable.
  2. Onboard screw terminal for direct wiring
  3. 2,500 VRMS Isolation voltage
  4. Suitable for DIN-rail mounting
  5. BoardID is switchable
  6. Easily visible LED indicators on board to do diagnosis.
Compare More
AMAX-1754-AE
CIRCUIT BOARD, Open Frame 32-ch Isolated DO Module
  1. Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable.
  2. Onboard screw terminal for direct wiring
  3. 2,500 VRMS Isolation voltage
  4. Suitable for DIN-rail mounting
  5. BoardID is switchable
  6. Easily visible LED indicators on board to do diagnosis.
Compare More
AMAX-1756-AE
CIRCUIT BOARD, Open Frame 16-ch Isolated DI/16-ch DO Module
  1. Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable.
  2. Onboard screw terminal for direct wiring
  3. 2,500 VRMS Isolation voltage
  4. Suitable for DIN-rail mounting
  5. BoardID is switchable
  6. Easily visible LED indicators on board to do diagnosis.
Compare More
PCI-1202U-AE
2-port AMONet RS-485 PCI Master Card
  1. Max. 20 Mbps transfer rate
  2. 2 independent AMONet RS-485 Master Rings
  3. Max. 128 AMONet RS-485 slave modules supported
  4. Programmable digital input to notify events
  5. Easy installation with RJ45 phone jack and LED diagnostic

Rs.26,745

Compare More
Page 1 of 2
x
Contact Us

1-800-425-5071
1-800-425-5070

Monday-Friday 9-6 PM

Contact Advantech