Contact Advantech Search Shopping list
  1.  
  2. Bangalore : 1800-425-5071 | Pune : 1800-425-5070
  3. Login
Order By Part Number
Home Motion Control Centralized Motion Control

Centralized Motion Control

Advantech’s full product offering can accommodate all your motion control needs. You can choose from 3-axis and 4-axis controllers, pulse-output or voltage-output, ISA-bus-based or PCI-bus-based, and standard PC-based or embedded in a system. The functions of the motion cards also vary from high-end 3-axis circular interpolation cards to point-to-point motion devices.
Results per page 91872 | Sort by Price Highest / Lowest
Page 1 of 1
PCI-1220U-AE
CIRCUIT BOARD, 2-axis Stepping/Pules-type Servo Motor Card
  1. Independent 2-axis motion control
  2. Hand wheel and jog function
  3. 2-axis linear interpolation function
  4. 2-axis circular interpolation function
  5. Continuous interpolation function
  6. Programmable T/S-curve acceleration/deceleration rate
  7. Up to 4 Mpps output for each axis
  8. Two pulse output types: CW/CCW or pulse/direction
  9. Up to 1 MHz encoder input for each axis
  10. Two encoder pulse input types: A/B phase or up/down
  11. Constant speed control
  12. Position management and software limit switch function
  13. BoardID™ switch

Rs.31,965

Compare More
PCI-1243U-AE
4-axis Low Cost Stepping Motor Control Universal PCI Card
  1. 4 axis stepping motor control
  2. PCI universal bus
  3. Up to 400 k pulse output rate
  4. T-curve acceleration/deceleration
  5. Pulse/Dir and CW/CCW pulse output mode
  6. Up 24-bit step count
  7. Opto-Isolated Digital input and output
  8. Up to 1,500 Vrms system isolation
  9. BoardIDTM switch

Rs.19,750

Compare More
PCI-1245-AE
Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Hardware emergency input
  7. Watchdog timer
  8. Position latch via ORG & index signal
  9. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

Rs.50,354

Compare More
PCI-1245E-AE
Economic 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer for trajectory planning (circular trajectory and auto blending are not supported)
  4. Supports E-Gear
  5. Hardware emergency input
  6. Watchdog timer
  7. Position latch via ORG & index signal
  8. Programmable interrupt

Rs.33,569

Compare More
PCI-1265-AE
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

Rs.68,936

Compare More
PCI-1784U-AE
4-axis Quadrature Encoder and 4-ch Counter Universal PCI Card with 8-ch Isolated Digital I/O
  1. Four 32-bit up/down counters
  2. Single ended or differential inputs
  3. Pulse/direction and up/down counter
  4. x1, x2, x4 counts for each encoder cycle
  5. Optically isolated up to 2,500 VDC
  6. 4-stage digital filter with selectable sampling rate
  7. On-board 8-bit timer with wide range time-base selector
  8. Multiple interrupt sources for precision application
  9. 4 isolated digital input
  10. 4 isolated digital output
  11. BoardID™ switch

Rs.26,706

Compare More
PCL-833-BE
3-axis Quadrature Encoder and 2-ch Counter ISA Card
  1. 1.0 MHz max. quadrature input rate
  2. Three 24-bit counters (can cascade up to 48 bits)
  3. Optically isolated up to 2,500 VRMS
  4. 4-stage digital filter
  5. 2.4 MHz max. input pulse rate
  6. Pulse/direction and up/down counting
  7. Digital input with interrupt for each axis
  8. Programmable time-interval interrupt
  9. Half-size AT bus card

Rs.25,140

Compare More
PCL-839+-AE
3-axis Stepping Motor Control ISA Card
  1. Independent, simultaneous control of three stepping motors
  2. Optically-isolated outputs
  3. Five isolated digital inputs per axis for limit switches
  4. Half-size PC add-on card
  5. Up to 200 kpps step rate
  6. 16 x DI/O

Rs.31,021

Compare More
Page 1 of 1
x
Contact Us

Bangalore : 1800-425-5071 | Pune : 1800-425-5070

Monday-Friday 9-6 PM

Contact Advantech